Type 4: Design with four filter cartridges. BADU Quick complete filter unit with self-priming circulation pump BADU 90/7.
BaduMatt R 41
Sand filters must be periodically backwashed in order to loosen up the sand and to eliminate filtered dirt through the waste system. This requires, among other things, the hydraulic current of the filter circulation pump to be reversed through the filter housing. After backwashing, fresh water must be fed into the system in order to reestablish the original water level. This is best done automatically with our BADU-Niveau-Control BNR 55 or BNR 200 S.
BaduMatt R 51
All parts which come into contact with water are made from corrosion-resistant plastic (ABS) or stainless steel.
BaduMatt T 1
BADU Mat T 1 Sidemount, with socket connection Ø 38, filter connection d 50.
BaduMatt T 1 G
BADU Mat T 1 G: Glue connection d 50/ glue union d 50, filter connection d 50
BaduTronic 2002-2
Do not install lower than 3 m below water level. Lead the sewage pipe above the water level in a loop. In case this is not feasible, install a special non-return valve in the sewage pipe.
BaduTronic 93 V 4
Do not install lower than 3 m below water level. Lead the sewage pipe above the water level in a loop. In case this is not feasible, install a special non-return valve in the sewage pipe.
Metering Pump M1+M2
Monoblock pump with an integrated strainer. Bellows-type mechanical seal mounted on a plastic impeller hub. Electrical separation.
Metering Pump V 600
Centrifugal pump with a peripheral impeller. Bellows-type mechanical seal mounted on a plastic impeller hub. Electrical separation.
